Section 3: Using a remote interface
DMM6500 6½ Digit Multimeter User's Manual
3-8
DMM6500-900-01Rev. A / April 2018
Figure 19: Name Virtual Instrument dialog box
9. In the Virtual Instrument Name box, enter a name that you want to use to refer to the instrument.
10. Select
Finish
.
11. Select
Cancel
to close the Wizard.
12. Save the configuration. From the Keithley Configuration Panel, select
File > Save
.
Verify the instrument through the Keithley Communicator:
1. Click
Start > Keithley Instruments > Keithley Communicator
.
2. Select
File > Open Instrument
to open the instrument you just named.
Figure 20: Keithley Communicator Open an Instrument
3. Click
OK
.
4. Send a command to the instrument and see if it responds.