Section 9: Measuring power using digitizing and TSP-Link
DMM6500 6½ Digit Multimeter User's Manual
9-2
DMM6500-900-01Rev. A / April 2018
Equipment required
This application requires the following equipment:
•
Two DMM6500 instruments
•
Two KTTI-TSP communication and digital I/O accessory cards
•
One computer set up for communication with the instrument
•
One ethernet crossover cable
•
Several insulated banana cables
•
One device or component to be tested
Device connections
This application requires two KTTI-TSP communication and digital I/O accessory cards.
1. Insert one card into the accessory card slot on the rear panel of each instrument. Refer to
(on page 3-14) card for install instructions.
2. Connect the instruments with a crossover cable connected to the communication cards.
Figure 42: Two DMMs connected with TSP-Link