2910-VSG Vector Signal Generator Quick Start Guide
2910-903-01 Rev. A / February 2006
22
6. Navigate to file to open a waveform file. The file for a GSM / EDGE waveform will have a *.csv
notation indicating it is in a comma separated value format.
7. Select the
waveform file.
8. Select
Load
, to place the file on the instrument display, ready for editing or applying to the RF
carrier signal.
9. Select
Load
to apply the waveform to the RF carrier signal. Notice that the waveform
modulation details appear below the
Modulation On
button.
10. Ensure both the
RF On
and
Modulation On
buttons are selected.
Getting information from Help
You can quickly access information that shows you how to set up and control output signals using the
2910 front panel interface and programming commands. You can access the 2910 Help from the front
panel menu and from the CD-ROM that was shipped with the instrument.
Help from the Front panel
To access the Help from the 2910 front panel, select
Menu > Help > Help System…
.
Help from the CD-ROM
To access the Help from the 2910 CD-ROM:
1. Insert the CD-ROM into the computer.
2. If the computer is not set up for Auto-Run, double-click the CD drive in Windows Explorer.
3. When the CD launches, double-click the
Open the 2910 System Help
link.
4. Either
Open
the Help for immediate use or
Save
it to a computer file for later recall and use.