2910-VSG Vector Signal Generator Quick Start Guide
2910-903-01 Rev. A / February 2006
19
Setting up a basic signal with various input devices
This set of
example procedures
show you how to set up the frequency and power of a signal with the
following input devices:
Front panel puck
Numeric keypad
Front panel knob
Mouse
Set up a carrier frequency
With the front panel puck:
1. Select the
Frequency
field to activate it.
2. Press the left arrow on the puck to change the frequency step to 1 GHz.
3. Press the up arrow on the puck to change the frequency to 2 GHz.
4. Press the right arrow on the puck to change the frequency step to 0.01 GHz.
5. Press the up arrow to change the frequency to 2.01 GHz.