![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750673.webp)
Section 7: TSP command reference
Model 2657A High Power System SourceMeter® Instrument Reference Manual
7-360
2657A-901-01 Rev. B/December 2012
Example 1
instrumentID = tspnet.connect("192.0.2.1")
if instrumentID then
-- Use instrumentID as needed here
tspnet.disconnect(instrumentID)
end
Connect to a TSP-enabled
device.
Example 2
instrumentID = tspnet.connect("192.0.2.1", 1394,
"*rst\r\n")
if instrumentID then
-- Use instrumentID as needed here
tspnet.disconnect(instrumentID)
end
Connect to a device that is
not TSP-enabled.
Also see
(on page 7-137)
(on page 7-141)
(on page 7-366)
tspnet.disconnect()
This function disconnects a specified TSP-Net session.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
tspnet.disconnect(
connectionID
)
connectionID
The connection ID returned from
tspnet.connect()
Details
This function disconnects the two devices by closing the connection. The
connectionID
is the session handle
returned by
tspnet.connect()
.
For TSP-enabled devices, this aborts any remotely running commands or scripts.
Example
testID = tspnet.connect("192.0.2.0")
-- Use the connection
tspnet.disconnect(testID)
Create a TSP-Net session.
Close the session.
Also see
Содержание 2657A
Страница 3: ......