![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750679.webp)
Section 7: TSP command reference
Model 2657A High Power System SourceMeter® Instrument Reference Manual
7-366
2657A-901-01 Rev. B/December 2012
tspnet.tsp.abort()
This function causes the TSP-enabled instrument to stop executing any of the commands that were previously
sent to it.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
tspnet.tsp.abort(
connectionID
)
connectionID
Integer value used as a handle for other
tspnet
commands
Details
This function is appropriate only for TSP-enabled instruments.
Sends an abort command to the remote instrument.
Example
tspnet.tsp.abort(testConnection)
Stops remote instrument execution on
testConnection
.
Also see
None
tspnet.tsp.abortonconnect
This attribute contains the setting for abort on connect to a TSP-enabled instrument.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Instrument reset
Recall setup
Not saved
1 (enable)
Usage
tspnet.tsp.abortonconnect =
value
value
= tspnet.tsp.abortonconnect
value
1 (enable) or 0 (disable)
Содержание 2657A
Страница 3: ......