Page 7
DOC1048R (21 December 2023 17:31)
www.keit.co.uk
Back to Table of Contents
1.7.1. Pressure and temperature limits
The maximum pressure and temperature (ambient and analyte) limits for the device vary
depending on the model. Refer to the product label to confirm the limits. Do not exceed the
pressure limits on the product label as this could be dangerous and will invalidate the warranty.
If in doubt, contact Keit for advice before installing the spectrometer.
1.7.2. Partition walls
The minimum partition wall thickness is 1 mm.
The material of the partition wall is given by the final part of the model number as follows:
Code
Probe Material
[blank]
Hastelloy
TI
Titanium
IN
Inconel
SS
Stainless Steel
TA
Tantalum
