Page 10
DOC1048R (21 December 2023 17:31)
www.keit.co.uk
Back to Table of Contents
2.2. How to connect data communications
Like the power cable, the IRmadilloNA is supplied with a permanently connected flying lead
for communication that is passed through a cable gland. You must ensure that the cables are
sufficiently protected from loading and twisting. The cable should ideally be routed above
ground to avoid accidental damage.
NOTE
REMARQUE
Ensure the mains and data communication cable connectors
are dry prior to mating.
Assurez-
vous que les connecteurs du câble d’alimentation et de
celui de communication des données sont secs avant de les
brancher.
NOTE
REMARQUE
Keep the dust caps fitted on connectors when not in use.
Never leave an exposed connector.
Maintenez les bouchons antipoussière installés sur les
connecteurs lorsqu’ils ne sont pas utilisés
. Ne laissez jamais un
connecteur exposé.
Model numbers of the form ASM0627-09-N-Cx-O-G-xx have the Hawke FibreEx in-line
connector for use in explosive atmospheres. The flying lead from the IRmadilloNA mates with
the supplied extension cable.
2.2.1. Connecting the Hawke FibreEx in-line connector
•
Unscrew the cap on the end of the connector.
•
Align the key on the connector with the keyways in the corresponding connector
•
Mate the two connectors together
•
Rotate the shell secure and complete the connection
•
Check that the green and orange lights on the controller are present (Figure 5)
Figure 3 Hawke in-line plug and socket
