(4) Take off the shade hood and blackout cover on the sprinkling tray, the gauze above the bean (do not
take off gauze during bean-sprout) after 3 days when the plant lights automatically open. Then cover the
sprinkling tray again. At the same time, to avoid water leakage outside the product, please pay attention
to the water tubes.
Note: During the growth process, take off the shade hood. If any defective seedling is found, please
remove.
(5) Added Nutrient Solution
After taking away the Shade hood (that is 4
th
day of planting), Nutrient Solution can be added. (Sprouts
does not need to add Nutrient Solution)
Volume required: Nutrient Solution A: 60ml, 2caps
Nutrient Solution B: 30ml, 1 cap
(6) Seedlings can be collected around 10 days (seed can be collected by depending on their growth
process). Cut at 0.8-1cm of the bean valve, seedling can grow again.
Note: If you found the recycling water is too much during planting, please use the cleaner pump to
adjust the water level. This can avoid rot of the seedlings / sprouts, or spill over. (adjust once every 3
days generally)
(7) After collecting the seedling, the second time, clean the trays and seedling tray. Make sure the
pumps are unplugged before taking out the trays.
(8) Repeat the above steps to grow seedlings.
12.
Eggplant Fruit Layer Cultivation
Planting pattern is same as vegetable pattern. Eggplant fruit layer can be used for Cherry tomato or
plants with taller leaves.