Keison TECHNE Tecal 140F, Руководство оператора

Страница: 11 / 23

PAGE 9
T e c a l 1 4 0 F, T e c a l 4 2 5 F a n d T e c a l 6 5 0 F O P E R A T O R ’ S M A N U A L
Working conditions for all claibrators
The Tecal units are designed to work safely under the following conditions:
Ambient temperature range 5°C to 40°C
Humidity
Up to 95% relative humidity, non-
condensing
Note: The control specifications quoted are for an ambient temperature
range of 10°C to 30°C. The specification may deteriorate outside this range
but the unit will still work safely.
Radio frequency interference tested and passed to EN50081-1.
Immunity Tested and passed to EN50082-1
Packing
When you receive your unit, make sure you keep the original packing in
case you ever need to return it for service or repair. When returning a unit,
remember to remove the insert from the temperature controlled block.
The unit must be transported in the original packing to avoid damage. The
packing comprises; the unit in the soft carrying case packed with foam into
an outer cardboard box. Techne accepts no responsibility for damage
incurred unless the unit is correctly packed and transported in this way.
Installation
1 Place the unit on a suitable bench, a flat workspace ensuring that the
air inlet and outlet VENTS are not obstructed.
2 Place the appropriate insert in the calibrator.
3 Plug the mains cable into the socket in the side of the unit.
4 Where apprpropriate connect the RS232 socket to a computer. See
page 16.
ON/OFF switch
RS232 9-way
PC serial port
Power inlet
where appropriate
Fuses