![background image](http://html1.mh-extra.com/html/keiser/m3-tbt/m3-tbt_user-manual_3931528005.webp)
ASSEMBLING MAIN FRAME TO THE BASE FRAME
Step 1
: Carefully lower the Main Frame onto the base frame over the base screws, with
the front of the TBT facing the transport wheels on the Base Frame. (Fig. 1)
Step 2
: Insert one washer on each of the four base frame studs. (Fig. 1)
Step 3
: Install the acorn nuts (L1) and the aircraft washers (L2) on the studs and hand
tighten Torque the acorn nuts with a 16mm or 5/8” crowfoot and torque wrench to
47 Nm (35 ft-lbs) using a 16mm, or 5/8 inch open-end wrench to hold in position. (Fig. 2)
ASSEMBLING PLASTIC COVER
Step 1
: Obtain the #2 Phillips screwdriver and remove the screws from the plastic sweat
guard. (Fig. 3)
Step 2
: Slide on the Platstic Cover and snap it over and align with the mounting holes of
the Sweat Guard. (Fig. 4)
Step 3
: Insert and secure the screws removed in
Step 1
using the #2 Phillips screwdriver.
(Fig. 5)
TBT ASSEMBLY
1
2
3
5
4
Содержание m3 TBT
Страница 1: ...USER MANUAL ...