manualshive.com logo in svg
background image

KEISER M SERIES CARDIO WARRANTY TERMS

The Keiser M3 TBT is warranted to the original purchaser, to be free from defects in mate-

rials and workmanship.

 

NOT COVERED UNDER WARRANTY

 - Loss caused by accident, abuse, improper use or neglect.

 - Improper maintenance.

 - Improper assembly by the purchaser.

 - Failure to follow instructions as stated in any of the manuals provided with the Keiser M3 TBT 

The  warranty  terms  begin  with  the  date  of  original  delivery  to  be  evidenced  by  appropriate 

shipping  documents.  Any  alteration  of  the  equipment  so  listed  without  express  written 

consent  of  Keiser  shall  constitute  a  waiver  by  the  buyer  of  this  warranty.  This  warranty 

does  not  cover  other  brand  name  products  distributed,  but  not  manufactured  by  Keiser, 

which  are  subject  to  their  respective  manufacturers  warranties.  During  the  warranty  

period,  warranted  defects  will  be  repaired  at  Keiser,  Fresno  California,  or  the  defective 

part  will  be  replaced,  at  the  option  of  the  manufacturer,  without  charge  for  either  parts 

or  labor  to  repair  the  defective  part.  This  warranty  does  not  cover  the  removal  of  the  

defective  part  and  installation  of  the  repaired  part.  All  claims  under  the  warranty  must 

be  in  writing  and  authorization  obtained  from  the  manufacturer,  Keiser,  to  return  the  

defective parts for exchange. Defective parts must be returned to Keiser. The customer is  

responsible for all transportation costs on returned items to and from the point of manufacture. 

Users, agents, or anyone directing the use of said equipment shall determine the suitability 

of the product for its  intended use, and said parties are specifically put on notice that they 

shall assume all risk and liability in connection herewith.  

 

The foregoing warranties are in lieu of and exclude all other warranties not expressly set 

forth herein, whether expressed or implied by operation of law or otherwise, including but 

not limited to any implied warranties of merchantability or fitness. Keiser shall in no event 

be liable for incidental or consequential losses, damages or expenses in connection with 

exercise products. Keiser’s liability hereunder is expressly limited to the replacement of 

parts not complying with this warranty or, at Keiser’s election, to the repayment of an 

amount equal to the purchase price of the parts in question. Keiser is not responsible for 

labor charges incurred in the replacement of defective parts. Keiser may, at its discretion, 

require the return of all defective parts. The customer is responsible for all transportation 

costs on warranted items to and from the point of manufacture. Replacement products 

are warranted for the balance of the original warranty period.

All Keiser equipment sold by Keiser distributors, dealers, or salespeople must be registered 

for warranty purposes. The warranty registration form must be filed within seven days of 

the sale or installation. Keiser equipment exported out of the US or Canada will be void of 

warranty unless purchased directly through a Keiser international distributor or dealer in the 

country of installation, or direct from Keiser’s international division.

If you experience any problems please contact our Service Department 

phone: 559.256.8000 | toll free: 1.800.888.7009 | email: [email protected] 

KEISER CORPORATION

2470 S. CHERRY AVE.

FRESNO, CA. 93706

555513_C

Содержание m3 TBT

















Отзывы: