NukaTap Counter Pressure Bottle Filler Instruction Manual
Page
11
of
13
Last Updated 27/07/2021 3:26 PM
Step 6.
Secure the bottle against the silicone bung to form a seal.
Step 7.
Press the purge button again to fill the headspace of the bottle with 10psi. This will create
counter pressure within the bottle and balance out the pressure in the keg to reduce foaming.
Step 8.
Open the tap which will allow beer to begin flowing into the bottle. If the transfer of liquid
into the bottle slows to a halt slowly rotate the large knurled bleed valve counter clockwise to allow
some gas to escape. This will allow liquid to begin flowing into the bottle again.
Secure the bottle against the stopper and
purge the headspace for a few seconds
Open the tap to begin the transfer of beer
Open the large knurled bleed valve to
allow some gas to escape when the flow
of beer slows.
