NukaTap Counter Pressure Bottle Filler Instruction Manual
Page
8
of
13
Last Updated 27/07/2021 3:26 PM
CO
2
/Gas Inlet Configuration
There are two main ways that your can configure your gas inlet into the NukaTap Counter Pressure
Bottle Filler.
Connecting to a regulator via a duotight fitting and EVABarrier Hosing
1.
Screw the
¼” Male x 8mm duotight fitting into the
Gas Inlet
of the NukaTap Counter Pressure Bottle Filler
2.
Push your EVABarrier gas hosing firmly into the duotight
fitting on the gas inlet.
Connecting to a regulator via a quick disconnect and EVABarrier Hosing
This method allows for your NukaTap Counter Pressure Bottle Filler to be quickly connected
and disconnected from your kegging system without having to disassemble your gas
connections.
1.
Screw the
¼” Male x
6.35mm duotight fitting into the Gas
Inlet of the NukaTap Counter Pressure Bottle Filler
2.
Firmly push the barb of the red gas male ball lock post into
the duotight fitting on the Gas inlet of the counter pressure
bottle filler.
3.
Use a grey ball lock disconnect (
) to connect
EVABarrier gas hosing from your regulator to the red gas
male ball lock post.