NukaTap Counter Pressure Bottle Filler Instruction Manual
Page
12
of
13
Last Updated 27/07/2021 3:26 PM
Step 9.
Once the bottle is full, close the NukaTap. Then pull on the smaller knurled bleed valve to
release any pressure in the headspace of the bottle. Then remove the bottle from the bung and cap
it immediately
Bottling from a FermZilla or Keg
The procedure for bottling from a FermZilla or keg is the same as bottling from a NukaTap, however,
you want to keep the NukaTap counter pressure bottle filler disconnected from your FermZilla or
keg until step 8.
Once at step 8 the liquid ball lock disconnect for the beer inlet can be pushed onto the FermZilla, keg
to begin the flow of beer.
Once the bottle is full disconnect the beer supply by removing the ball lock disconnect from the
FermZilla or keg.
Pull on the smaller knurled bleed
valve to release pressure in the
headspace
Once the bottle is full. Close the
tap