KL25164
–
Chuck Installation Manual
Page
5
of
12
Last Updated 21/12/2022 16:17 PM
1.6
Install your Replacement or VISY Chuck
Install your chuck onto the thread of the drive shaft ensuring that the spring assembly has been
installed into the chuck in the orientation below, such that the spring inserts into a bung on either
end:
Firmly Tighten the chuck onto the driveshaft with the hook spanner while holding the drive shaft in
position with a spanner
1.7
Reinstall the 1
st
Operation Roller onto the 1
st
Op Actuation Arm
