Keestar GA204-107, Инструкция по эксплуатации

Страница: 36 / 41

2
2
Function And Description Setting Range Unit Remarks
P-1 x origin -500000------500000
P-2 y origin -500000------500000
P-3 thread trim open angle 0------355
P-4 thread release dev angle 160------320
P-5 Clamping solenoids PWM 10------1000
P-6
presser plate 1 solenoids pwm 10------1000
P-7 presser foot solenoids pwm 10------1000
P-8 presser plate 2 solenoids pwm 10------1000
P-9 x sensor polarity 0invariant---1negation
P-10 y sensor polarity 0invariant---1negation
P-11 y drive mode 50---250
P-12 clamping open angle 0-----170
P-13 needle stop position check -300-----300
P-14 count of pressure box signal 0-----4
P-15 limiting speed 400-----2700
P-16 Thread loose open time 1-----180
P-17 pressurebox width check(mm) -300-----300
P-18 presser foot up time 50-----2000
P-19 main shaft start time 40-----1000
P-20 presserfoot max height 30-----200 mm
P-21 z sensor polarity 0invariant---1negation
P-22 foot motor rotation direction 0invariant---1negation
P-23 pressure plate1 nature state 0down---1up
P-24 pressure plate2 nature state 0down---1up
P-25 pressure plate2 function 0---3
P-26 X sewing range 500-12000 mm
P-27 Y sewing range 400-10000 mm
P-28 clamp close angle 1-350
P-29 sweep thread 0clamp---1choose
P-30 u origin -800---800
P-31 v origin -800---800
P-32 clamping cylinder status 0close---1open
P-33 Foot Max Dynamic Height 50---120
P-34 thread trim solenoids pwm 10---1000
P-35 thread loose solenoids pwm 10---1000
P-36 oil motor work time 1---60
P-37 oil motor stop time 1---60