![background image](http://html1.mh-extra.com/html/kees-van-der-westen/slim-jim-mirage/slim-jim-mirage_user-manual_3884430014.webp)
USER MANUAL - operation
Slim Jim User manual
page 13
Start automatic back-flush program
See paragraph “
” on page 22 for complete back-flush procedure
.
When the machine is in “normal” operational mode touch the MENU icon on the interface.
In the next screen touch the button
“CLEAN PROGRAM”.
operational window
touch
menu window
touch
This will start the cleaning program. The display will
immediately return to the upper (operational) window.
The groups will pressurise (duration: 16 seconds) and de-pressurise (duration: 10 seconds) 8 times
successively and then the machine will return to normal operation. Indicator LED(s) on the
corresponding Bastone unit or touchpad will flash during the cleaning program.
Note!
If a group is activated during the back-flush program, the group valve of that group will de-activate but
the back-flush routine will continue on the other group(s).
When all groups are manipulated, the group valves will all close but the pump will finish the back-flush
routine.
Flow meter error
When flow rate of a group becomes very low or stops, the flow-meter is not able to accurately
measure the amount of water passing through and the display will show an error message.
operational window
group 3 shows a
flow-meter error
This will not affect any ongoing action of the machine but “volume in the cup” may not be as
programmed. The error message will remain visible until the group is activated a next time.
The error message will not be shown during the cleaning program (automatic back-flush program).
GROUP 1
93.4
GROUP 2
45.6
GROUP 3
93.2
STEAM
124.6
MENU
STAND
BY
EXTERNAL
SENSOR
CLEAN
PROGRAM
SETTINGS
13 : 57
GROUP 1
93.4
GROUP 2
45.6
GROUP 3
flow m.
STEAM
124.6
MENU