Fitting Cantilever Matcutter Supports
SECTION 8
���
Put a
grub screw
backwards into each of the
joining brackets
- do not place
grub screws
in the other holes
at this stage.
���
Attach the
joining brackets
to the
legs
Decide upon the height required for the
supports
and fit the
brackets
on two adjacent
legs
accordingly.
Note:
the flat faces of the bracket should
face each other.
���
Attach the
beams
to the
brackets
Assemble the two
beams
on to the
brackets
and fasten with the grubscrews.
Fit the
beam end caps
.
���
Placing a matcutter
When placing a matcutter directly on to the
supports
(ie. when not extending the worktop
across them) place the
rubber pads
on the
beams
to support the right hand edge of the cutter.
✓
✗
ITEM
QTY
Beam
2
Joining
Bracket
2
ITEM
QTY
Allen Key
1
ITEM
QTY
Grub Screw
6
Rubber Pad
2
Beam
End Cap
2
TOOLS
You should have :
➠
