���
Make the
Centre frame
Assemble the frame using the
beam with holes
and the other single
beam
of the same length. ensure the
beam with holes
is assembled
the correct way round (
see diagram
)
Tighten all the
grub screws
using the long end of the
allen key
. ensure
there are no gaps between the ends of the
beams
and the
legs
, then
lock the
grub screws
using the short end of the
allen key
.
���
Assemble the frame work
Using the remainder of the
beams
assem-
ble the framework as shown. Start from one
end frame and attach 3 beams, then the
centre frame,3 beams and then the
remaining end frame. Ensure all
grub
screws
are tightened fully
and there are no
gaps between
the beam ends
and
legs
.
➤
���
Fitting the
leg-end caps
Carefully trim the
leg-end caps
as
shown, keeping your fingers behind the
blade at all times.
R.H. END
FRAME
L.H. END
FRAME
CENTRE
FRAME
HOLES TOWARDS
THE BACK
FRONT LEG
BACK LEG
CENTRE FRAME
훾
훿
훽
훾
훿
훽
