It is advisable to fit one piece worktops cut from
18mm (
3
/
4
”) MDF. When deciding on the size of
your worktop make allowances for any overhangs
you require.
The worktop
clips
are hooked into the slot on the
inside of the
beam
and screwed into the underside
of the worktop. Position one
clip
near to each
corner of the top and space any others accordingly.
Matboard storage units also have worktop fixing
holes in the
dividing rod supports
.
Fitting the Worktop
SECTION 7
JOINING PLATE
If you are fitting multiple piece worktops, use the
joining plate
(PI01) to fix adjoining worktops
as
shown
. This will prevent a step along the join.
