훽
Cut the fabric larger than the worktop allowing about 10cm
(4”) overhang on all four sides. Apply tape or adhesive
around the edges and to the middle of the worktop.
Covering the worktop with fabric
SECTION 6
Worktops can be covered with many types of worksurface, the Proteus covering (PN01/2/3) is a grey non woven fabric which will not
fray or unravel and can be moulded around worktop corners.
Proteus worktop fabric has a smooth upper surface and slightly rougher underside to key into adhesives. Use double sided carpet
tape, carpet/flooring adhesive or staples.
훽
훾
훿
훾
Fold the sides of the fabric down and pinch the flap made
in each corner, trim with scissors.
훿
Fold the fabric to the underside, again pinch and trim. A
few staples in the underside will ensure the fabric is held in
place whilst the adhesive cures.
TOP
APPLY
DOUBLE SIDED
TAPE OR ADHESIVE
PINCH
PINCH
UNDERSIDE
ALSO APPLY
AROUND
EDGE ON
UNDERSIDE
➠
➠
➠
➠
✄
✄
