11
1. Install 86 box (the recommended installation height of 86 box is 1.3m from the ground);
2. Align the 2 screw holes at the bottom of the shield back to the 2 screw holes on 86 box, and use a marking pen
to make marks on the wall at the 2 holes on the top, then drill holes and insert the expansion screw tubes;
3. Pinch off the flange plate on the shield with pliers, and then fix the shield onto the 86 box with two cross
recessed countersunk head screws M4
*
50 (factory accessories);
4. Fix the shield onto the wall with two cross countersunk head stainless steel tapping screws ST3
.
9
*
25C
(factory accessories);
5. Align the holes on the device back to the staple bolts on the shield, thread the staple bolts through the holes
and pull down the device so that the device is hung on the shield. Thread the buttcock line of the device
through the shield and place into the 86 box;
6. Tighten the fixing screws at the bottom and finish installation;
7. Peel off the protective film on the screen.
Install with 86 Box (Recommended)
Wall
86 Box
Shield
Device
3
4
5
6
1
For convenience and elegance sake, we recommend the installation method with 86 box.
Expansion Screw Tube
2
Pinch off Flange Plate
7
1
.
3m
Содержание KSCA120 Series
