background image

2

3

Special

 

Statement

The product appearance is subject to the actual device and picture

 

in

 th

is

 

Guide

 is for reference only.

.

Ÿ

Every effort has been made to ensure the accuracy and validity of this Guide. Any update of this Guide 

Ÿ

caused by version upgrade is subject to change without notice.

This Guide is made for multiple models but it will not illustrate one by one. Please refer to it according to the 

Ÿ

actual products you are using.

This

 

device

 

can

 

be

 

used

 

after

 

being

 

activated

 

through

 

IPCSearch

 

with

 

a valid email address for claiming the 

Ÿ

password.

To ensure the safety of device on internet, it is strongly recommended that you set a strong password which 

Ÿ

is composed of at least 2 kinds of the following, digits, case-sensitive letters or specific symbols, and whose 
length ranges from 8 to 16 bits. Please modify the password periodically and once every 3 months is 
recommended. If the device is used in highly risky environment, suggest modifying the password monthly or 
weekly. Please keep your user name and password safe.

Accessing

 

this

 

device

 

to

 

the

 

internet

 

is

 

at

 

user

'

s

 

own

 

risk

including

 

but

 

not

 

limited

 

to

 

the possible

 

network

 

Ÿ

attack

hacker

 

attack

virus

 

infection

 

and

 

etc

This

 

company

 

will

 

not

 

assume

 

any

 

responsibility

 

for

 

problems

 

of

 

product

 

abnormality and information disclosure caused thereof. We

 

shall

 

provide

 

technical

 

support

 

relating

 

to

 

the

 

products

 

in

 

time

For

 

the latest documents, please download at our website www.kedacom.com.

Ÿ

Содержание KSCA120 Series

































Отзывы: