Long-Range Medium-Load PTZ Camera
User Manual
59
5.5.2
Guard Tour
Guard Tour means the dome camera can perform preset operations if not receiving any command
in a specific period of time (i.e. the Waiting Time on the interface). Configuration steps are as
follows:
1) Go to
Settings > Camera > PTZ > Guard Tour
;
Picture 5-25 Guard Tour
2)
Select “
Enable
”;
3)
Select a mode from the dropdown list of “Guard Tour”;
Pan Mode: Camera rotates in pan direction from 0° to 360° automatically. The Waiting
Time is configurable.
Load Preset: After user stops operating on the camera for a certain period of time, the
camera will return to a preset position automatically. The Waiting Time and Preset No. are
configurable. Please refer to chapter 5.5.3.
Path Mode: After user stops operating on the camera for a certain period of time, camera
will enable Path Mode automatically. The Waiting Time is configurable. Please refer to
chapter 5.5.5.
4) Set
“Waiting Time” according to the mode.
5)
Click “
Save
” to validate setting.
5.5.3
Preset Position
Preset position includes information of PT position and lens focal length. It is set by user and can
be loaded, edited or deleted anytime. The maximum number of presets allowed to be set is 512.
Configuration steps are as follows:
1) Go to
Settings > Camera > PTZ > Preset
;
