Long-Range Medium-Load PTZ Camera
User Manual
27
Picture 4-4 Multicast
Stream Type:
the stream to be sent, the default being “Main Stream”.
Media Type:
the media type of the stream to be sent, the default being “Video”.
Multicast Address: the address to send the stream, fill it according to the actual conditions.
Multicast Port: the multicast port of the multicast address, the default being 61000, ranging 1 ~
65535.
Send Mode:
options include “Passive” and “Initiative”. Under “Initiative” mode, if the multicast
addres is normal and valid, the default setting is to send stream to this multicast address;
under “Passive” mode, only when receiving the request of multicast can the system send
stream to the multicast address. If the address is set 0.0.0.0, the system will send stream to
239.2.2.2 by default.
TTL: Time to Live, ranging 0~255.
Note: TTL means the maximum number of network segments allowed to pass through IP data
packet before it is discarded by the router. It is used to avoid endless loop of sending and receiving
the data packet in the network so as to save network resources.
4.2 Access Protocol
Go to
Settings > Network > Access Protocol
, and access the camera to different platforms by
configuring different access protocols.
4.2.1
VSIP
The web client supports accessing to back-end platform through VSIP protocol. Configuration
steps:
