P30
UDP interface: Guidelines
UDP Programmers Guide V2.01
12
© KEBA
Whitelist
Operating status
State
Plug
AuthON Authreq
Empty
idle
1
3
0
0
Empty
plugged but not charging
2
7
0
0
Empty
charging
3
7
0
0
Not empty
idle and locked
1
3
1
1
Not empty
unlocked and not charging
1
3
1
0
Not empty
unlocked and plugged but not
charging
2
7
1
0
Not empty
unlocked and charging
3
7
1
0
The following can be concluded for all device types listed as P30 c-series: If
the field “AuthON” is set to “0”, then the authorization function is disabled.
2.4.2
P30 x-series
P30 x-series features a web interface with a dedicated setting for the autho-
rization function. This function is governed by an additional circuit board
called “COM-module” which also houses the WiFi components. The RFID
authorization can be deactivated even though the whitelist of the charging
station is not empty.
P30 x-series will behave like P30 c-series after a restart until the COM-mod-
ule is ready (~ 5 min after restart). The data shown in the following table can
be acquired using the command
report 2
.
Whitelist
Operating status
State
Plug
AuthON Authreq
Empty
idle
1
3
0
0
Empty
plugged but not charging
2
7
0
0
Empty
charging
3
7
0
0
Empty
idle and locked (cannot be un-
locked since whitelist is empty)
1
3
1
1
Not empty
idle
1
3
0
0
Not empty
plugged but not charging
2
7
0
0
Not empty
charging
3
7
0
0
Not empty
idle and locked
1
3
1
1
Not empty
unlocked and not plugged
1
3
1
0
Not empty
unlocked and plugged but not
charging
2
7
1
0
Not empty
unlocked and charging
3
7
1
0
The following can be concluded for all device types listed as P30 x-series: If
the field “AuthON” is set to “0”, then the authorization function is disabled.
