Keba KeContact P30, Руководство программиста UDP

Страница: 20 / 35

P30 UDP commands
UDP Programmers Guide V2.01
20
© KEBA
Field Contents Additional Description
Curr HW
uint16
Possible values:
0; 6000 - 32000
Maximum current value in mA that can be
supported by the hardware of the device.
This value represents the minimum of the
DIP switch settings, cable coding and tem-
perature monitoring function.
E start
uint32
Possible values:
0 - 999999999
Total energy consumption (persistent, device
related) without the current charging session
in 0.1 Wh at the beginning of the charging
session.
Max. value is 99999999.9 Wh (higher values
will cause a counter overflow).
E pres
uint32
Possible values:
0 - 999999999
Energy transferred in the current charging
session in 0.1 Wh. This value is reset at the
beginning of a new charging session.
Max. value is 99999999.9 Wh (higher values
will cause a counter overflow).
started[s] uint32
State of the system clock in seconds from
the last startup of the device at the start of
the charging session.
ended[s] uint32
State of the system clock in seconds from
the last startup of the device at the end of the
charging session.
started
YYYY-MM-DD
hh:mm:ss.000 string
(23 chars) If the device cannot access an NTP time
server, this field will contain the same data
as “started[s]” or set with “setdatetime”.
ended
YYYY-MM-DD
hh:mm:ss.000 string
(23 chars)
If the device cannot access an NTP time
server, this field will contain the same data
as “ended[s]”. If the device can access the
internet, it will try to reach an NTP time
server. This date stamp will represent the
current time in UTC at the end of the charg-
ing session.
reason
0 Charging session has not ended.
1
Charging session was terminated by unplug-
ging.
10
Charging session was terminated via deau-
thorization with the RFID card used for start-
ing the session.
timeQ
0
Not synced time (for more information see
“setdatetime”).
X
Strong synced time (for more information see
“setdatetime”).
2
Weak synced time (for more information see
“setdatetime”).
RFID tag
000000000000…
String (20 chars) RFID Token ID if session started with RFID.
First character is the lowest nibble.
RFID class
000000000000…
String (20 chars)
If all digits are “0”, then no RFID card was
used to start the charging session (authoriza-
tion is set to “OFF”).
Serial String (8 chars) Serial number of the device
Sec uint32
Current state of the system clock in seconds
from the last startup of the device