E10 Smart Energy Meter
Find the IP current address of your Energy meter
V1.01
6
© KEBA 2023
3
Find the IP current address of your Energy meter
Requirements
●
In order to find out the IP address of your KeContact E10 energy meter,
you need to know the
IP address range
of your local network. The IP
address range depends on the used router (e.g. “192.168.0.x” or
“192.168.42.x” for a P30 x-series network).
Access your DHCP server (router) of your local network and look for the
IP address range. To do this, please refer to the manual of your device.
●
KeContact E10 must be powered up and connected to the local network.
Using the network scanner software
1) Download and install a suitable Network Scanner software.
E.g the “
Advanced IP Scanner
” ( https://www.advanced-ip-scan-
ner.com/ ) is used for the following instructions.
2) Start the “Advanced IP Scanner” software tool.
3) Enter the IP address range of your local network (
1
). If the P30 x-series
is the DHCP server, please enter “192.168.42.1-254”.
4) Click the “Scan” (
2
) button.
5) Enter “E10” in the text filter field (
3
).
The current IP address of your KeContact E10 should show up (
4
). If it does
not, please restart and / or reset your KeContact E10 as described in the Ke-
Contact E10 Installation manual).
Содержание KeContact E10
Страница 1: ...KeContact E10 Smart Energy Meter IP Configuration guide V 1 01...
Страница 11: ......
Страница 12: ...KEBA Energy Automation GmbH Reindlstra e 51 4040 Linz Austria www keba com...