Keba KeContact E10, Руководство по настройке

Страница: 8 / 12

E10 Smart Energy Meter Set a fixed IP address for your Energy meter
V1.01
8
© KEBA 2023
2) Also enter Port „502“ and Node „1“ .
3) Switch the function to “ Read Holding Registers ” and set the Data
value type to “ Unsigned Int16 ”.
Read out current IP settings
1) Enter 259 in the Register field and click “ Transmit packet ”. This should
show the first value of the currently set IP address. If an error is shown,
check if the IP address of the KeContact E10 is correctly set. If not
restart and / or reset the KeContact E10.
2) Repeat this process also for Register 260-262 .
Example: Read out IP address 192.168.0.137 Response value
Register 259 192
Register 260 168
Register 261 0
Register 262 137
Example: Read out subnet mask 255.255.255.0 Response value
Register 263 255
Register 264 255
Register 265 255
Register 266 0
DHCP assignment Response value
Register 267
1 = enabled
0 = disabled