Keba CDF3000, Руководство по эксплуатации

Страница: 19 / 94

Operating Instructions CDF3000
2-3
2 Mechanical installation
1
2
3
4
5
A
DE
EN
FR
IT
ES
FR
2.2 Wall mounting
Table 2.1 Device mounting
Fig. 2.1 Mounting clearances (see Table 2.2)
Step Action Comment
1
Mark the position of the tapped holes on the
backing plate.
Cut a tap for each fixing screw in the back-
ing plate.
Dimensional drawings/hole spac-
ing see
Table 2.1 The tapping area will
provide you with good, full-area
contact.
2
Mount the servo regulator vertically on the
backing plate.
Do not forget the mounting clear-
ances! The metal of the contact
surface must not be insulated.
3
Mount the other components, e.g. mains fil-
ter, mains choke etc. on the mounting plate.
The cable between mains filter
and servo controller is allowed to
be max. 30 cm long.
4
Continue with the electrical installation in
section 3.
F
E
G
F
≥
3 mm