KEB F5 COMBICOM ModBus, Инструкция по эксплуатации

Страница: 4 / 14

GB - 4
F5 ModBus Operator: 00.F5.060-A000
Utilities for the diagnosis interface
HSP5 cable between PC and adapter:
00.F5.0C0-0001
Adapter DSUB / Western: 00.F5.0C0-0002
1. ModBus
Interface
1.1 Ordering Information
Hardware Description
SUBD9 (Female) connector is supplied for connecting to the ModBus. This connector
supports the RS232 or alternatively the RS485 transmission standard. The assignment
of the connector is as follows :
Pin Name Description
1 NC Not used
2 RS232_TxD RS232-Tx-Signal
3 RS232_RxD RS232-Rx-Signal
4 RS485_RxD(A) RS485-Rx-Signal-A
5 RS485_RxD(B) RS485-Rx-Signal-B
6 VCC Power supply of the serial interface
7 GND Reference potential of the serial interface
8 RS485_TxD(A) RS485-Tx-Signal-A
9 RS485_TxD(B) RS485-Tx-Signal-B
ModBus Interface
MDB: This green LED shines if
a ModBus service is
running.
ERROR: This red LED blinks if the
frequency inverter control
is in error state.
It shines constantly if the
frequency inverter is rea-
dy for operation.
If this LED is constantly
off then there is no power
supply.
X6B: Diagnosis interface
X6C: ModBus interface
connector (SUBD9
female).
ANTRIEBSTECHNIK
START
STOP
FUNC.
SPEED
ENTER
F/R
E
SDO
PDOUT
PDIN
X6B
X6C
COMBIVERT