KEB DYNAMIC LINE 4 SF-CF-SP30, Руководство пользователя

Страница: 33 / 76

33
cONNEcTION
4.5 Encoder connection
WARNING
Subsequent adjustment of the measuring system
Malfunction and uncontrolled reactions of the motor !
The measuring system of the synchronous motors is factory-adjusted to
the respective drive controller. Any mis-adjustment may lead to uncon-
trolled motor response or complete failure of the motor.
In order to avoid any risk, the motor must be put into operation only in
no-load operation, without connection to the system.
4.5.1 Resolver terminal assignment
Description View Pin No. Signal colour
View to the
connector pins of the
resolver connector
at the motor
1
9
8
7
12
6
10 2
3
4
11
5
1 SIN- red
2 COS- pink
5 REF- yellow
7 REF+ green
10 SIN+ blue
11 COS+ grey
All unspecified contacts are not
assigned.
Figure 9: Resolver terminal assignment
Drive controller series Required encoder cable
COMBIVERT
F6
00S6L50-10yy
1)
S6
Table 7: Resolver encoder cable
1)
Assembled, shielded, towable, yy = cable length in metres.