PREVENTIVE MAINTENANCE
Preventive maintenance should be done in daily,
weekly, monthly and yearly intervals as necessary.
Following preventive maintenance procedures will help
keep your MIRACLEAN® Griddle working efficiently.
Proper care and servicing will lead to years of quality
performance.
PREVENTIVE MAINTENANCE CLEANING
CHART
AVOID SERVICE CHECKLIST
Before calling for service, review this list. It may save
you both time and expense. This list includes common
occurrences that are not the result of defective
workmanship or materials in this appliance.
WARRANTY REPAIRS
Keating’s warranty begins with the date of installation.
In the event that your Miraclean® Griddle, under
warranty, needs repairs other than routine cleaning,
you are requested to contact KEATING OF CHICAGO,
INC. (1-800 KEATING).
CLEANING THE MIRACLEAN®
GRIDDLE
The surface of the MIRACLEAN® Griddle is very
durable and with proper care, following the procedures
below, will last many years.
A sample of Keating Klenzer, Keating palmetto brush
and a 4" scraper are included with each new griddle.
1. Scrape MIRACLEAN® surface.
2.
Clean your Miraclean® Griddle while hot at
300° to 350°. Using a plastic pitcher, pour
water ahead of a palmetto pot brush. Then
scrub the griddle clean with the pot brush
sweeping the water into the drain trough.
3.
Sprinkle with Keating Klenzer.
Polish with a soft cloth (towel). It will sparkle
like new in just a few minutes. Rinse with
potable water to remove excess Keating
Klenzer. Proper care should be taken to fully
clean the griddle on a regular basis.
CLEANING CONTROL PANEL
Clean any grease build-up on switches and thermostat
knobs.
NOTE:
If grease gets into the working mechanism of
a switch or thermostat, it may cause the unit to fail.
GREASE BUILD-UP NEAR ANY OPEN FLAME IS A
FIRE HAZARD.
5
TIME OPERATOR/OWNER
FRAME
At Least
z
Clean MIRACLEAN® Griddle surface.
Daily
z
Drain and clean grease drawer.
z
Completely wipe down MIRACLEAN®
Griddle cabinet.
At Least
z
Check MIRACLEAN® Griddle surface
Monthly*
to insure proper maintenance.
(Review proper cooking
procedures.)
z
Check calibration of
thermostats.
z
Review operating instructions
received with MIRACLEAN® griddle.
Every
z
Clean gas valve vent tube.
6 Months*
z
Check burner manifold pressure.
At Least
QUALIFIED SERVICE PERSONNEL ONLY
Yearly*
z
Have MIRACLEAN® griddle completely
checked, calibrated, tested, cleaned, etc.
by qualified service personnel. Be sure to
check color and height of pilot flame.
*High production facilities should be checked more often.
Contact the factory or a local service company to perform
maintenance and repairs.
PROBLEM
SOLUTION
Miraclean® Griddle
z
Is the gas connected?
does not operate:
z
Is the gas supply turned on?
z
Is the gas valve knob in the ON
position?
z
Is the pilot lit?
z
Is the switch turned on?
z
Is the thermostat set at the desired
position?
