KDK Basic Series, Инструкция по эксплуатации

Страница: 8 / 40

7
Requirement of installation
■
It’s prohibited to install in the following locations.
Locations with temperature
exceeding 40
℃
or less than -10
℃
.
Locations where freezing could happen.
(Such as refrigerators)
It’s prohibited to install in the uneven
surface.(Flatness shall be 3mm below.)
It may cause a fire.
40℃
Distortion results in reducing
the separation performance.
Factory, kitchen or other locations
where cooking fumes is produced.
Locations with heavy sand and dust.
Blade deformation may be caused by
sand and dust piling up in impeller may
affect the performance.
cooking
fumes
■
The lowest surface of this product
should be mounted above 2.3m from
the floor after installation.
■
The distance between product and
ceiling must be 50mm above.
The ceiling is excessively close
to air inlet that may reduce the
separation performance.
■
Please install the product horizontally,
don’t vertically install the product.
It could affect the performance
of bearing.
■
Ensure the space among products is
20
～
40mm when multiple products
operating in row.
■
Please block the clearance between
wall and product by means of partition
plate.
Prevent product
from sucking out
door air from
clearances.
50mm above
20
～
40mm
2.3m above
Easy for installation.
Touching the product
may result in injury.