KDK Basic Series, Инструкция по эксплуатации

Страница: 19 / 40

Routine maintenance
△ △ △ △ △ △ △ △ △ △
△ △ △ △ △ △ △ △ △ △
△ △ △ △ △ △ △ △ △
△ △ △ △ △ △ △ △
● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
●
●
●
●
To safely use the product in a long time, please follow these items below.
1)Note that all screws don’t work loose. It tends to cause vibration, dropping or a fire.
2)Motor is intended to use for about 20000 hours. But the actual life of motor may vary
depending on service environment.
3)Maintenance should be done by entrusted distributor or repair shop to service the
product.
Please refer to the table below to maintain the product. (The service life may be shorter
depending on service environment)
Routine maintenance can keep the efficiency of operation, may prevent increase of
energy loss and extend the service life of product.
Mainly maintain the
motor and impeller.
Mainly note the
noise and vibration.
△ △
Maintenance key points
18
■
Routine Maintenance
Check point
Situation of operation.
Abnormal noise or vibration.
1.Maintenance period is affected by service time and service environment.
2.Generally service time :10 hours for a day, 300 days for a year, 3000 hours
in total.
3.Please contact with the distributor or repair shop regarding to cleaning,
replacement.
Gate
magnetic
switch
Motor
Impeller
Front
panel
Part
△ Maintenance
●
Cleaning ○ Replacement.
1st
year
2nd
year
3rd
year
4th
year
5th
year
6th
year
7th
year
8th
year
9th
year
10th
year
Remove dirt.
Remove check dirt, noise
and vibration.
Noise, vibration.
Remove dirt.
■
Maintenance period
Parts work loose such as
terminal block or screws.
Rust or corrode of metal parts
such as motor, screw, etc..
Every
day
Every
month
Every
half year
Every
year
Maintenance period
Remarks
NOTE
Fasten screws.
Conduct the
replacement.