KDK Basic Series, Инструкция по эксплуатации

Страница: 13 / 40

12
Operation methods
■
Basic series
Operation of Control panel
Start to operate
1
2
3
Select the mode of operation
Stop operating
OFF
Press “HI”or“LO” button to start the product
as shown in left figure.
Press “HI” button if high air velocity is
required.
Press “LO” button if quiet operation and low
velocity is required.
The product is in stand-by mode after pressing the “OFF”.
Press “OFF” button to stop the product.
LO HI OFF
LO HI OFF
LO HI OFF
※
Interlocking operation of gate magnetic switch
Sensor series are controlled to operate or stop by magnetic switch.
The gate magnetic switch works only when “HI” or “LO”are pressed.
Product will operate when both magnetic switch are separated.
Product will stop when both magnetic switch are within specific distance.
After 10 seconds of delay operation.
LO HI
■
Sensor series
NOTE
OFF LOW HIGH
※
Representative model
4009UA