3
Installation cautions
■
Connect the product to supplied
power by means of specified wire.
■
A over load protection device must be
installed in the wiring when installing.
May cause fire or
electric shocks.
■
It’s prohibited to install any other
substances with magnetic among the
diameter of 20m from gate magnetic
switch for sensor series.
It may result in fault or error
conditions caused by
magnetic disturbance.
The connection position of
terminal must be firmly fixed.
■
Grounding should be connected.
May cause electric shocks.
■
All installation and maintenance shall
be done by qualified persons.
Unqualified construction may
cause unexpected accidents.
EARTH WIRE
■
Any other power supply other than
the rated voltage is prohibited to
use.
May cause fire or damage
the unit.
■
Do not reconstruct this product.
Otherwise, it may cause
damage to the product or
injury.
Improper installation may cause
the product to fall off.
■
Do not install the product as the
method which is not approved in the
instruction.
■
It's prohibited to install the product in
locations such as machinery, chemical
plants or research facilities where it
will be exposed to noxious gases
containing acids, alkali, organic
solvents, paint fumes, etc., to gases
containing corrosive ingredients.
It could cause gas poisoning,
corrosion and degradation of
product that results in a fire.
■
Use the screws with specified
quantity and diameter and fasten
them when hanging the product.
Otherwise the product may fall
down and it may cause injuries.
WARNING
