13
Operation methods
Operation of Control panel
Start to operate
1
2
3
Select the mode of operation
Stop operating
Press “AIR VOLUME ” button to start the product
as shown in left figure.
Press the
“AIR VOLUME ”
to shift air volume.
The signal light for
air volume turns off.
The product is in stand-by mode after pressing
“STAND-BY
”
button, at this moment, it’s still connected
with power.
High air velocity is required.
Quiet operation and low air
velocity is required.
Press “STAND-BY” button to stop the product.
Operation of Remote control
LOW
HIGH
NOTE
Remote control series
Signal light for low operation Signal receiver
Signal light for high operation
The button in control panel can be operated for emergency in case
if remote control is not avaliable. Please operate with fingers
other than sharp or hard substances. Pay attention to the dangers
while operation in high level.
Press “HI” or “LO”button
to start.
STAND-BY
LOW
HIGH
NOTE
※
Representative model
3009GA
