14
Operation methods
Operation of remote control
Please hold the remote control toward the signal receiver
and use it within 5m from the signal receiver at angle
of 30° as shown below.
Signal receiver
Remote control
NOTE
The remote control should
be used with product in same room.
Setting of battery for remote control
1.Open the back cover.
2.Put the 2 batteries provided
into remote control.
3.Close the back cover.
Back cover
of remote
control
Remote
control
Battery
（
note the direction
of
）
NOTE
■
Don’t reverse the direction of .
■
Don’t mix old battery with new one.
■
Remove batteries if they are not to be used for a long time.
Related safety cautions concerning
the use of battery
Wrong use of battery could result in
liquid leakage, heating or breakage which
resultsin injuries or malfunction of product,
please comply with the following items.
■
Wash immediately thoroughly with large
amount of water without rubbing if alkaline
liquid enters into your eyes and then get medical
treatment. Otherwise it could lead to blindness.
■
Battery should not be placed in position where
infants and young children could reach.
Once swallowed, please get medical
treatment immediately.
■
Don’t discard the battery into fire, and heating,
decomposition or self-transformation is also
prohibited. It could lead to liquid leakage,
heating or breakage if damaging the insulation
substances or exhaust valve.
■
Don’t tear the outer packing of battery.
WARNING
CAUTION
Fix the support for remote
control at 1.5m height away
from the ground, and put the
remote control into the
support. (only applied to
remote control series)
20mm
Signal transmitter
