-14-
Copy Mode
Copy mode is used to copy programs between courses.
Using Copy Mode
①
Go to Stand-by mode, select the course you want to copy.
②
Press the copy key to go to destination selection screen (shown below).
③
Press
▲▼
and select the course number where you want to copy the program to.
Selected course will be in yellow.
④
Press the [OK] key to copy the program. If you want to copy to the course followed by another,
repeat
④
and
⑤
.
⑤
Press [Back] key to go back to Stand-by mode.
Default Mode
This mode is used to set buzzer volume, temperature correction value, & temperature unit.
Enter Default Mode
During Standby Mode, press [Default] key. The screen displays the following screen.
Setting of each item in the default mode
Change the value to move the item by pressing the up or down arrow keys, press the
key
▼
,
▲
.
Setting the buzzer volume (4 stages
：
Consumption, Small, Medium, Large)
①
Key Sound
：
Default is Small. (Volume level when you pressing a key)
②
Ending Sound
：
Default is Large. (Volume of warning sound at the time of the error)
③
Announcement Sound
：
Default is Medium.
(Volume of sound notification upon completion of each STEP)
④
Other Sound
：
Default is Small. (Volume of other sound, such as power-up)
