-12-
Firing
When programming is complete, you can start firing.
Shown below is an example using course 98.
①
During Standby mode, press
▲▼
button to select
course 98.
②
Press the key to move the table down to the lowest
position.
③
Place firing objects inside the firing tray.
④
Place the firing tray on the quick firing stand.
Caution) Place the firing tray on the middle of the quick firing stand.
Caution) The quick firing stand and the muffle will be hot.
Be sure use the tongs and heat-resistant glove when
placing the firing tray onto the quick firing stand.
⑤
Press START/STOP key to start firing.
Firing Mode
When firing starts, the display turns to Firing Mode and shows furnace temperature, progress, &
the remaining time.
Display
Course
：
Course that is in process.
Course Name
：
Name of the course that is in process.
Temperature
：
Current furnace temperature.
STEP
：
STEP that is in process.
Remaining Time
：
Remaining time until STEP is fully completed.
Process Graph
：
Graph for the entire program.
The completed process is displayed in red.
