Unfolding Steps
If the wheelchair needs to be unfolded to use after the first unpacking or foldable store, please follow these steps:
1. As shown in Fig. G1 and Fig. G2, turn up the footrest, then, pull up the upper backrest with pinching the folding hand
knob. At the same time, lean forward the wheelchair to make it slowly unfold. After that, as shown in Fig. G3, push
forward the seat cushion to make the wheelchair fully opened.
2.
The control panel shall be mounted when first unpacking the wheelchair. You can refer to the instruction on Mounting
the Control Panel. (or refer to the videos)
24
25
Folding
Unfolding
G3
Control Panel
Folding Hand Knob
G2
G5
G4
Folding Steps
For storing and transporting the wheelchair, please follow these steps to fold it after using
:
1.
As shown in Fig. G4, adjust the upper backrest to the lowest level by pinching the backrest
adjusting knob. Pinch the folding hand knob, then, push the backrest slightly forward.
2.
As shown in Fig. G5, pull the front frame and move the footrest back to the front end of the seat
cushion, making the wheelchair folded. Then, the wheelchair can stand steadily through the rear
wheel and anti-tipping wheel. (If the wheelchair cannot be fully folded, please adjust the front
wheel to the proper angle. You can also refer to the videos.)
G1
Folding Hand Knob