1. As shown in Fig. 8, the manual mode knob is off before your first use. By using the joystick,
can be controlled to move the wheelchair. In this case, the wheelchair cannot be manually pushed by the
caregivers. When stopped on the ramp, the wheelchair will not slip off.
(
For ensuring the users
manual mode shall be off without the caregivers pushing the wheelchair
)
2. As shown in Fig. E9, the manual mode knob can be rotated about 90 degrees to
when the wheelchair is out of power or needs to be manually pushed by the caregivers.
E10 and Fig. E11
,
the
manual mode knob is on
.
(The figure shows the right side of the motor, the left side is
opposite) In this case, the wheelchair can be pushed without using joystick.
（
Users shall switch off the
manual mode knob without the caregivers pushing the wheelchair, in case of slipping off the slope as
the joystick is ineffective.
）
WARNING
1. The manual mode knob shall be off without the caregivers pushing the wheelchair.
2. Users shall fasten the seat belt when the
manual mode knob is on
.
Caregivers shall not leave the user
alone. The pushing speed shall not be fast.
3. The wheelchair shall be less pushed on the slopes. The pushing speed shall be slow
4.
When finishing pushing the wheelchair,
the manual mode knob shall be off
direction of Fig. E7
in time.
20
Electromagnetic Unlocking Valve / Manual Mode Knob
Manual Mode Knob
Manual mode knob has two modes. Before using the power wheelchair, please ensure that the manual mode
knob is off
（
Fig. E8
）
, otherwise, the wheelchair will not work properly or even cause hazard.
Manual mode knob is on
Manual mode knob is off
E8
E9
1.
As shown in Fig. E6, electromagnetic unlocking valve is in the lock position with the pristine condition.
When the wheelchair is out of power, the electromagnetic unlocking valve
brakes urgently, which avoids the risk that the wheelchair slips off the slope without being controlled.
2.
As shown in Fig. E7, when the wheelchair motor is out of power, electromagnetic
be pushed upwards to the unlock position, which allows the wheelchair to be
push downwards the electromagnetic unlocking valve to the lock position after manually moving.)
Keep tools and other metal objects away from
electric shock may occur and cause injury
Avoid flammable materials. Avoid exposure to heat source
Corrosive substance is contained in the battery. Do not disassemble the battery.
Do not short-circuit the battery or put the battery into the fire to avoid an explosion accident
1.Do not attempt to connect the battery terminal
directly using pliers or metal cables to charge the
battery.
2.Do not use the wheelchair when the battery is
being charged
.
★
3. Do not use non-standard power supply (eg.
generator or inverter
.
4. Prevent the power cord from being stepped on,
crushed and severely bent, especially at the port
part. Prevent the power cord from being yanked
and knotted.
5.
Keep children and pets away from the power cord
and don't let pets bite and chew the source line.
When pulling the power cord, please hold the plug
and pull it out.
By using the joystick, the motor
In this case, the wheelchair cannot be manually pushed by the
For ensuring the users’ safety, the
rotated about 90 degrees towards “ON” position,
or needs to be manually pushed by the caregivers.
As shown in Fig.
(The figure shows the right side of the motor, the left side is
Users shall switch off the
manual mode knob without the caregivers pushing the wheelchair, in case of slipping off the slope as
without the caregivers pushing the wheelchair.
Caregivers shall not leave the user
The wheelchair shall be less pushed on the slopes. The pushing speed shall be slow.
the manual mode knob shall be off in the opposite moving
★
1. Always check if the battery is fully
charged before use. The regular charging time is
about 5 hours. But if the power is fully run out
it may take 7-8 hours to charge fully until the
red LED on the charger turns green.
Battery
Electromagnetic Unlocking Valve / Manual Mode Knob
Manual mode knob has two modes. Before using the power wheelchair, please ensure that the manual mode
cause hazard.
E10
E11
position with the pristine condition.
unlocking valve works and the wheelchair
brakes urgently, which avoids the risk that the wheelchair slips off the slope without being controlled.
lectromagnetic unlocking valve can
to be moved manually. (Please
to the lock position after manually moving.)
Keep tools and other metal objects away from both ends of the battery. If contacted, short-circuit or
ck may occur and cause injury
。
Avoid flammable materials. Avoid exposure to heat sources such as open flame or sparks
.
contained in the battery. Do not disassemble the battery.
circuit the battery or put the battery into the fire to avoid an explosion accident
.
WARNING
Do not attempt to connect the battery terminal
directly using pliers or metal cables to charge the
chair when the battery is
standard power supply (eg.
Prevent the power cord from being stepped on,
crushed and severely bent, especially at the port
. Prevent the power cord from being yanked
m the power cord
bite and chew the source line.
When pulling the power cord, please hold the plug
6. If there is any issue with the circuit breaker, pull
out the charger immediately and contact your
contributor or professional technicians
.
7. The electronic locking anti-drive device will be
activated that prevents the chair from operating when
battery being charged.
8. The battery warranty and performance indicated in
the guide are only suitable for Li-ion Battery
.
9. Do not smoke or ignite anything around the battery.
10.The operating temperature of the battery ranges
from -5
°
C - 40
°
C.
Always check if the battery is fully
charged before use. The regular charging time is
about 5 hours. But if the power is fully run out
hours to charge fully until the
CAUTION
★
2. You shall charge the wheelchair after using until
the charger indicator turns green. When not
using the chair for a long duration, charge the
battery full every 2 months. If the battery is left
uncharged for a long period of time, it will
damage the battery permanently.
3. Do not use the batteries with incorrect
specification, voltage and capacity that may
damage your wheelchair and affect the
performance.
21