Load Limit
WARNING
Positioning Seat belt
1.
The max load of the wheelchair is 150kg (330lbs)
，
do not exceed the max load while using the wheelchair.
2.
Under no circumstances should the users do weight training while using the wheelchair.
3.
Overloading the wheelchair may cause damage to the frame, fastened parts and folding device. It
may cause serious damage to the users or others, and also damage the wheelchair.
4.
Overloading caused damages will void the warranty of the wheelchair.
Getting Up/Down Escalators
The seat belt can be used to prevent the users from falling off
the wheelchair. It cannot protect the users in accidents.
The seat belt can be adjusted according to the user's comfort.
The use of the seat belt
：
1.
You must fasten the seat belt to ensure personal safety.
2.
Open the safety buckle (Fig. D2) by pinching the plastic card (Fig. D1).
3.
After sitting down, insert the buckle plastic card into the plastic case on
the other side and you will hear a click.
4.
You can adjust the length of the seat belt via the adjusting buckle (Fig. D3).
Ensure the seat belt is appropriately adjusted so that it does not make you
uncomfortable.
5.
When you need to get off the wheelchair, press the safety button and pull out the plastic card.
Following issues shall be noted when getting up/down escalators:
★
It is prohibited to move or use the wheelchair on stairs and escalators. Serious bodily injury may be caused.
Wheelchairs can be used in elevators. Please move the wheelchair when the elevator door is opened, and
make sure the door remains open when you pass through the door.
CAUTION
Always ensure the seat belt is installed on the wheelchair properly and appropriately
adjusted so that it does not make you uncomfortable.
Always check the seat belt for any loose part or if it is damaged. If any problem is found,
please ask for maintenance or repair through after-sales service.
14
15
Installation Guide
Safety
D1
D3
D2
WARNING
