background image

• A two-time beep indicates that your player is con-

nected to the tanning device.

 

 

megaSun 01

 megaSun 01

  

 

 

 

     

• Set your player to a 

medium volume level and 

start the music. 

• Adjust the volume level on your player.

• During the tanning session, the volume control has 

to be done at the tanning device.

DISCONNECT EXTERNAL PLAYER
An existing connection is disconnected automati-
cally after tanning.

The connection is automatically disconnected if the 
tanning session is not started within 6 minutes.

COMPATIBILITY OF BLUETOOTH DEVICES
KBL AG attaches great importance to hardware com-
patibility. Due to the large number of manufacturers, 
KBL can not guarantee a 100 % compatibility. In rare 
cases, it may happen that a bluetooth connection 
can not be established.

CORRECTIVE ACTION
Each unit offers a list of paired bluetooth devices. 
Delete the older entries in this list which have a pro-
file that overlaps with the ones for which you want to 
pair your player.
Start the bluetooth device detection again.

O p e r a t i n g   I n s t r u c t i o n s

 

|

 megaSun space 2000

12

Содержание megaSun space 2000





















































Отзывы: