en
Monoflex
™
I N S TA L L AT I O N A N D U S E R ’ S I N S T R U C T I O N S
ART NOS. SH120XS, SH120S, SH120M, SH120L, SH120XL,
SH122XS, SH122S, SH122M, SH122L & SH122XL
WARNING!
Product should be installed and
fitted by a qualified rehab technician.
For installation, this product should be mounted
with:
Flat-mount end-fittings
Cinch-mount end-fittings
Cam buckle (1” suitable for users up to 75kg, 1-1/2”
and 2” suitable for all users)
Optional Bodypoint belt mounting hardware may
be used for mounting to wheelchairs and seating
systems.
WARNING!
Because of the risk of choking, it is
dangerous to use this product without stabilizing
the pelvis – always use with a properly fitted
pelvic support belt.
USE:
WARNING!
This product should only be used
for positioning a person in a wheelchair or work
chair. It is NOT intended for use as a transporta-
tion safety device, as a personal restraint device,
or in any other application where its failure could
result in injury. Misuse of this product is
unauthorized and unsafe.
WARNING!
Accidental release of this chest
belt can allow the user to slip down or fall from
the wheelchair. If the user’s movements or
cognitive abilities could lead to accidental
release, a caregiver must be present at all times
during its use. Ensure that all caregivers know
how to unfasten the product. Failure to do so
may delay release in an emergency.
WARNING!
As with any new seating support,
this product may change the way a person sits.
Users must continue to practice regular pressure
relief activities and skin integrity checks, not only
where this product contacts the user, but also in
primary pressure-bearing areas such as the
sacrum, legs, and buttocks. If increased skin
redness or irritation occurs, discontinue use and
consult your physician or seating specialist.
Failure to do so may result in serious injury, such
as pressure ulcers.
MAINTENANCE:
Check periodically for signs
of wear in the stitching, webbing, and pads. If
significant wear is found, contact your supplier
for qualified repair or replacement by Bodypoint.
Under no circumstance should this product be al-
tered or repaired by unqualified persons – health
and safety depend on it!
CLEANING:
Machine wash, hot,
60°C (140°F). Do not bleach. Tumble dry, low
temperature, or drip dry. Do not iron. (Placing
the product inside a cloth bag during washing
helps prevent scratches to the product and the
machine.)
WARRANTY:
This product carries a limited-life-
time warranty against defects in workmanship
and materials arising under normal use by the
original consumer. Contact your supplier or Body-
point for warranty claims.
For more information on Bodypoint products, and
a list of distributors outside the USA, go to www.
bodypoint.com
These instructions provide important information for the safe use and maintenance
of all Bodypoint Monoflex™ Chest Belts. Give these instructions to the user or their
caregiver and review them to ensure that they are understood.
558 First Ave. S., Suite 300 | Seattle, WA 98104 | 206.405.4555 | 800.547.5716 | www.bodypoint.com
BPI100-en 2018.6
MDSS GmbH
Schiffgraben 41
D-30175 Hannover
Germany
