KBL megaSun 7900 Alpha, Руководство по эксплуатации

Страница: 6 / 64

O p e r a t i n g I n s t r u c t i o n s | megaSun 7900
α
6
Transport by forklift truck
WARNING
Overturning load
Danger of being crushed by heavy parts
of the equipment.
• Keep the safety distance to the trans-
port machine.
• Do not walk under the load.
• Wear safety shoes.
The tanning device may be damaged
when using short forks.
• Use only sufficiently long forks.
The tanning device is mounted on a pallet.
• Insert the forks carefully into the openings of the
pallet.
• Lift the load by a few centimeters.
• Transport the load carefully to the place of
installation.
Other modes of transport
If a forklift truck cannot be used for transport, the
tanning device must be partially disassembled and
the parts must be transported individually to the
place of installation, e.g. using a dolly. Depending
on the weight of the components, lifting them might
require several people..
Old equipment disposal
This tanning device consists of
components that cannot be thrown into the
household garbage!
Dispose of your old equipment in an environmentally
friendly manner after the end of its useful life. Metals
and plastics can be recycled. Electrical and elec-
tronic components must be disposed of as e-waste.
Fluorescent lamps must be dropped off at authorized
collection points for pollutants.
This helps to avoid damaging effects to the
environment and human health caused by improper
disposal.
This makes a valuable contribution to recycling and
other forms of utilization of old electrical and elec-
tronic equipment.
You can obtain information about environmentally
friendly disposal from your local government or the
municipal administrations.
CAUTION
Risk of mercury toxicity
Risk of mercury toxicity after a lamp
breakage.
• Ventilate the room / environment at least
15 minutes before disposing the lamp
fragments.
Service
For all service-related questions, please contact your
responsible specialist dealer.
Updating system software
Risk of damage by switching off the
power supply voltage.
Disconnecting power supply during the
update process, will lead to damage of elec-
tronic components.
• Make sure that the tanning device is not dis-
connected from the power supply voltage dur-
ing the update.
To accomplish the update download the “USB-
Connect” software offered by KBL. For detailed
information press the help-button in the main menu.