A s s e m b l y I n s t r u c t i o n s
|
6808 /7908
38
• Connect the audio cables.
5.13 Attach left shoulder piece
PH2
• The left shoulder piece is installed similar to the
right shoulder piece.
5.14 Fine adjustment of the
bench lock
5
Attention
The bench and the bench pane can be
damaged when it is opened incorrectly.
• Open the tanning device only with the
bench pane in position (closed)!
Adjust the bench lock so that
• the bench closes and stops with gentle pressure.
• the bench moves freely the entire distance and
does not touch other components.
The bench dampers must be centered in
the openings.
Adjustment options:
• Right/left offset – to be done via the front plate.
Grab hold of the top of the plate and using physical
strength carefully jerk it in the required direction to
move it sideways.
• Height offset – can be adjusted by adjusting screws
on the side (ISK spanner SW 5).
5
5.15 Install side plates
PH2
On both sides (left/right):
• Pull of protective fi lm.
