Chapter 4. Getting Started
18
Kaye HTR-420 User Manual
4.5
Calibrator Setup
Refer to the below sections to change the default settings. To access these parameters, click on
the cancel icon in the upper right-hand corner, this brings up a new screen with the following
three options:
End Remote Control
,
Switch Off
, and
Cancel
. Tap on
End Remote Control
,
which takes you to the Standalone home screen. Next, tap on the tools icon in the upper left-
hand corner to bring up the
Calibrator Setup
home
screen.
Set Screen Brightness
•
You can modify the screen brightness
(100% default)
by tapping on the
Display Settings
calculator icon then choose
Brightness
on the
Set Display
window.
Enter the desired value (1 through 100) for screen brightness on the numeric keyboard.
Confirm selection by touching the check mark icon to save the change and then the to
return to the
Calibrator Set Up
window.
Set Language Selection
•
Select Language selection from the
Calibrator Set Up
window by touching the world
icon. The current language is indicated in the information box on the left while all installed
languages can be seen in the selection list on the right.
Select the desired language by tapping the desired language.
Confirm selection by tapping on the check mark icon in the lower right of the screen, which
returns you to the
Calibrator Set Up
window.
Содержание HTR-420
Страница 1: ...Kaye HTR 420 Dry Block User Manual M5450 Rev A October 2020...
Страница 3: ......
